+86 0519 8878 2189
News Center
Home / News / Finned Tube Radiator for Air Preheater | Steam & Hot Water APH | CSTHEATEXCHANGER

Finned Tube Radiator for Air Preheater | Steam & Hot Water APH | CSTHEATEXCHANGER

Views: 0     Author: Site Editor     Publish Time: 2026-10-14      Origin: Site

In utility boilers, biomass energy plants, and industrial furnaces, feeding cold ambient winter air directly into combustion chambers or main rotary air heaters causes cold-end sulfuric acid condensation, ash plugging, and lower flame temperatures.

At CSTHEATEXCHANGER, we engineer Heavy-Duty Finned Tube Radiators for Air Preheaters (Steam Coil Air Preheaters - SCAPH). Utilizing auxiliary low-pressure steam, extraction steam, or boiler hot water, our finned radiators preheat forced-draft combustion air to 60°C–120°C, preventing cold-end acid dew point corrosion and increasing overall boiler thermal efficiency.

High-efficiency steam and hot water finned tube radiators by CSTHEATEXCHANGER for boiler combustion air preheating and frost protection.jpg

1. Why Choose CSTHEATEXCHANGER for Air Preheater Radiators?

  1. Cold-End Acid Corrosion Protection: Pre-warms inlet air before it contacts main flue gas recuperators, maintaining metal temperatures safely above the sulfuric acid dew point (Tdew≈120∘CTdew​≈120∘C).

  2. High-Pressure Steam & Water Durability: Seamless SA106B carbon steel, 20G boiler steel, or 316L stainless steel tubes handle operating pressures up to 2.5 MPa.

  3. Extruded Bimetallic & Welded Steel Fins: 100% metallurgical bonding guarantees zero thermal contact degradation over decades of heavy industrial duty.

  4. Low Air-Side Static Resistance: Calibrated fin pitch (4 to 8 FPI) minimizes forced-draft (FD) fan static pressure loss.

2. Technical Specifications

Parameter

CSTHEATEXCHANGER APH Radiator Specs

Operating Media

Saturated Steam (0.4–1.6 MPa), Boiler Hot Water (80°C–130°C)

Air Temperature Rise

Warms ambient air from -20°C up to +60°C ~ +120°C

Tube Metallurgy

Seamless Carbon Steel (SA106B/20G), SS304, SS316L

Fin Options

Extruded Bimetal Al, High-Frequency Welded Steel Fins (4–8 FPI)

Design Pressure

1.6 MPa – 2.5 MPa (Hydro-tested to 1.5x)

3. Contact CSTHEATEXCHANGER for Air Preheater Radiator Sizing

Protect your boiler air preheaters and boost thermal efficiency. Contact CSTHEATEXCHANGER today for SCAPH engineering sizing.

PHONE

International Business:+86 0519 8878 2189

Domestic business:+86 0519 8878 2190

QUICK LINKS

PRODUCTS

ABOUT US

When it comes to building heat exchanger for any application VRCOOLERTECH has the capability to meet your requirements.
Copyright © 2021 Changzhou Vrcoolertech Refrigeration Co.,Ltd All rights reserved.  Sitemap  Manage Entrance