+86 0519 8878 2189
Home / Personalized Products

Personalized Products

Vrcooler offers tailor-made products thanks to the possibility to personalize them and to collaborate with the customer in designing them.
The exchanger section shown here shows all the elements on which it is possible to make a personalization.
One of the fundamental components for the exchangers is the geometry that is used to maximize the thermal flux between the two fluids.
Special procedures are available, from treatment of surfaces to TIG welding, that Calligaris provides to further customize the product.
Thanks to its accurate three-dimensional design and to modern punchers and numerical control bending machines.
We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper.
We have heat exchanger design software which Guentner and Cabero are using,  Vrcooler offers tailor-made heating and cooling unit.

TUBES

OD 5mm: With wall thickness of 0.28mm plain as standard; 0.21-0.4mm rippled tube upon request

OD 7 mm : With wall thicknesses of 0,30mm plain as standard; 0,25 - 0,45mm (min.-max.) rippled tube upon request.
OD 9,52 mm : With wall thicknesses of 0,35mm plain as standard; 0,40 - 0,50 - 0,70 mm plain or 0,30 / 0,50mm (min.-max.) rippled tube upon request.
OD 12,70 mm : With wall thicknesses of 0,35mm plain as standard; 0,40 - 0,50 - 0,70 mm plain ; 0,35 / 0,61mm (min.-max.) rippled tube upon request.
OD 15,87 mm : With wall thicknesses of 0,40mm plain as standard ; 0,50 - 0,70 - 1,0mm plain upon request.

Tubes have the suitable quality for refrigeration and air conditioning.

FINS

The available tube arrangements and fin properties used in our company are given in details in the following pages. In addition to 8006 H22 aluminum alloy, copper foils, stainless steel fins and hydrophobic, hydrophilic, goldepoxy coated foils are also used upon request.

CASING

Galvanized, stainless steel, steel, copper and aluminium sheets are used as casework materials. Other appropriate materials can be used upon request.

BRAZING MATERIAL

The most appropriate brazing material is chosen according to the application area.

HEADER MATERIALS

Unless otherwise stated, steel manifolds are used for dry coolers, water and steam coils. For all other products, copper manifolds are used.

Fin Materials

Different type of coatings are applied depending on application areas and corrosion conditions.

Coils can be manufactured from copper, hydrophilic, hydrophobic or gold epoxy coated fins.

Depending on customer request, tin coating can also be applied to coils.

Fin Surfaces

Fin surfaces can be manufactured as ‘flat’, ‘corrugated’, ‘louvred’ types depending on customer requests. Please find some samples of these surfaces below.

Get Ready For The Future

Sign up for our newsletter to get updates straight to your inbox.

PHONE

International Business:+86 0519 8878 2189

Domestic business:+86 0519 8878 2190

QUICK LINKS

PRODUCTS

ABOUT US

When it comes to building heat exchanger for any application VRCOOLERTECH has the capability to meet your requirements.
Copyright © 2021 Changzhou Vrcoolertech Refrigeration Co.,Ltd All rights reserved.  Sitemap  Manage Entrance