Removable heat exchanger plate heat exchanger is composed of a set of corrugated metal plates with four angular holes for heat exchange of two liquid (gas) bodies to pass through. The metal plates are mounted in a frame with fixed plates and movable compression plates on the sides and clamped with c

What is a brazed plate heat exchanger?A brazed plate heat exchanger is a plate heat exchanger made by brazing adjacent corrugated stainless steel plates in a vacuum brazing furnace using pure copper (or nickel) as the brazing material. The plates form a channel between them, and the angular holes on

Plate heat exchanger for ships

The brazed plate heat exchanger is made of many stamped corrugated sheets at certain intervals, sealed around by gaskets, and overlapped with a frame and a compression screw. The four corner holes of the plate and the gasket form the separation of the fluid. At the same time, the cold and hot fluids

Where are air preheaters generally used?Adapt to the environment: coal-fired boilers, gas-fired boilersAdapt to flue gas temperature: boiler room with flue gas temperature higher than 120℃Application principle of air preheaterDuring the operation of the boiler, it is necessary to discharge flue gas