The heat exchanger is a heat exchanger used in denitration of flue gas produced by a steel rolling heating furnace, and the heat exchanger is arranged before the denitration reactor. Since the general denitrification device requires the flue gas to reach a certain temperature, the raw flue gas witho
13
2022-04
The flue gas produced by the hazardous waste incineration power plant is at a temperature of 50-70 °C after wet deacidification, and is in a saturated water state. Direct emission will corrode the flue and chimney, and produce white smoke at the chimney discharge. Therefore, it is necessary to use s
11
2022-04
The plate air preheater is composed of plate bundles, tube boxes, boxes, etc. The all-welded corrugated plate bundle module is used as the heat transfer unit, and the pure countercurrent corrugated plate is used as the heat transfer element, and the plates are welded and sealed. The heat transfer el
04
2022-04
A plate air preheater is a heat exchanger used for gas heat exchange. Compared with the traditional light tube bundle type and heat pipe type, the plate air preheater has a compact structure, high heat transfer coefficient, low pressure, and is not easy to accumulate dust, and can be cleaned online.
29
2022-03
need air to air heat exchanger for temp up to 230-250C
20
2021-12
Counter Flow Heat Exchanger for Energy Recovery VentilationApplications:Heat Recovery Air Handling UnitsDe-humidification of air streamsElectrical equipment coolingDrying rooms / kilns heat recycleMaterials:Aluminium with non-silicone adhesive - max 90°c.Aluminium with silicone adhesive - max 200°c.
