Gas plate heat exchanger (gas heat exchanger) and residual heat recycling1. The air heat exchanger is mainly plate heat exchanger. Compared with the tube heat exchanger, the heat transfer coefficient of the plate -type heat transfer device increases by 50%-200%, and the steel saves 50%-70%, accounti
21
2022-06
Air preheater is a gas-gas type heat exchange equipment, which uses flue gas to heat the air. This product is widely used in the latent heat recovery system of blowing air in the gas making section of chemical fertilizer plants, waste heat recovery of boilers, petroleum, metallurgy, etc. When the te
28
2022-05
A large amount of air needs to be consumed in the combustion process of the boiler. Before combustion, the air at room temperature needs to be heated to about 300 ℃, and then the air participates in the combustion. The heating process of the air also consumes a part of the fuel combustion energy.Aft
02
2022-05
The heat exchanger is a heat exchanger used in denitration of flue gas produced by a steel rolling heating furnace, and the heat exchanger is arranged before the denitration reactor. Since the general denitrification device requires the flue gas to reach a certain temperature, the raw flue gas witho
11
2022-04
The plate air preheater is composed of plate bundles, tube boxes, boxes, etc. The all-welded corrugated plate bundle module is used as the heat transfer unit, and the pure countercurrent corrugated plate is used as the heat transfer element, and the plates are welded and sealed. The heat transfer el
04
2022-04
A plate air preheater is a heat exchanger used for gas heat exchange. Compared with the traditional light tube bundle type and heat pipe type, the plate air preheater has a compact structure, high heat transfer coefficient, low pressure, and is not easy to accumulate dust, and can be cleaned online.
