Air preheater is a gas-gas type heat exchange equipment, which uses flue gas to heat the air. This product is widely used in the latent heat recovery system of blowing air in the gas making section of chemical fertilizer plants, waste heat recovery of boilers, petroleum, metallurgy, etc. When the te

A large amount of air needs to be consumed in the combustion process of the boiler. Before combustion, the air at room temperature needs to be heated to about 300 ℃, and then the air participates in the combustion. The heating process of the air also consumes a part of the fuel combustion energy.Aft

The heat exchanger is a heat exchanger used in denitration of flue gas produced by a steel rolling heating furnace, and the heat exchanger is arranged before the denitration reactor. Since the general denitrification device requires the flue gas to reach a certain temperature, the raw flue gas witho

The flue gas produced by the hazardous waste incineration power plant is at a temperature of 50-70 °C after wet deacidification, and is in a saturated water state. Direct emission will corrode the flue and chimney, and produce white smoke at the chimney discharge. Therefore, it is necessary to use s

The plate air preheater is composed of plate bundles, tube boxes, boxes, etc. The all-welded corrugated plate bundle module is used as the heat transfer unit, and the pure countercurrent corrugated plate is used as the heat transfer element, and the plates are welded and sealed. The heat transfer el