Advantages of Air Compressor Waste Heat Recovery

During the operation of an air compressor, about 80 per cent of the input electrical energy becomes heat, and the remaining 20 per cent will end up as compressed air energy. After the energy consumed by the compressor during operation is converted into heat, most of the compressed mixture is taken away by the cooling medium in the respective cooler and the heat is wasted. Theoretically, almost 98 per cent of the heat will be recovered, except for 2 per cent of the radiant heat that cannot be recovered. In order to better improve the heat utilisation rate, air compressor waste heat recovery energy saving equipment has appeared on the market.

Advantages of air compressor waste heat recovery and energy saving equipment:

High efficiency and energy saving, the effect is very obvious, can consume any energy, no power consumption, no oil burning, zero loss

Protected by water source, longer service life. As the access of energy-saving equipment is equivalent to the water-cooling project of the air compressor, the system can not only produce hot water for free, but also increase the air production, reduce the temperature, reduce the load of the cooling system, reduce the oil temperature, and extend the service life. Air compressor life.

Use it all day, as you like. Since the heat source of the hot water unit is the waste heat generated during the operation of the air compressor, the production of hot water is not affected by the weather. As long as the production is in progress, the hot water supply can be guaranteed around the clock.