 |
| Quantity: | |
|---|---|
Leather in the production and processing process need to be hot air drying, hot air is obtained through steam or heat-conducting oil and air heat exchange, hot air drying leather moisture through the exhaust port discharge.
Leather Drying Radiator generally adopts GLII type radiator produced by our factory.
GLII type radiator
GLII type heat sink is an improved product on the basis of GL type produced by our factory, which can replace GL type, I type and copper heat sink. GLII type steel heat sink has the highest heat transfer coefficient, so it is lighter in weight, smaller in size and consumes less metal than I type heat sink under the same heat production.
The fins of GLII type heat sink are 18×2.0-38mm, 21×2.0-41/45/51mm, 25×2.0-45/50/55mm, etc. The fins are spiral and the surface of the fins are galvanized, which can be divided into two rows, four rows, six rows, eight rows, etc. The working pressure of heat exchange medium is 1.5MPa and the working temperature is 300 degrees.
Leather in the production and processing process need to be hot air drying, hot air is obtained through steam or heat-conducting oil and air heat exchange, hot air drying leather moisture through the exhaust port discharge.
Leather Drying Radiator generally adopts GLII type radiator produced by our factory.
GLII type radiator
GLII type heat sink is an improved product on the basis of GL type produced by our factory, which can replace GL type, I type and copper heat sink. GLII type steel heat sink has the highest heat transfer coefficient, so it is lighter in weight, smaller in size and consumes less metal than I type heat sink under the same heat production.
The fins of GLII type heat sink are 18×2.0-38mm, 21×2.0-41/45/51mm, 25×2.0-45/50/55mm, etc. The fins are spiral and the surface of the fins are galvanized, which can be divided into two rows, four rows, six rows, eight rows, etc. The working pressure of heat exchange medium is 1.5MPa and the working temperature is 300 degrees.
