 |
| Quantity: | |
|---|---|
Fan Coil Heat Exchangers
We have latest machinery and tools to produce condenser and evaporator coils for air conditioning and refrigeration applications.
We make coils for air cooled chillers, package units, split units, window units and fan coil units.
We make coils for air handling units (AHU) and coolant cooling coils.
We also make coils for refrigeration applications for such as freezers and condensing units, air blast coolers, we use seamless copper tube with sufficient wall thickness.
We can provide Aluminum fins or coated (Hydro Phobic or Hydro Folic) Aluminum fins or copper fins. We can vary fin spacing as shown in the specification table.
Clients feedback
All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.
High quality raw materials(Main parts)
Name: Tube
• Material:
stainless steel, copper, aluminum, Cu-Ni, brass, titanium
• Diameter:
5mm, 7 mm, 7.94mm, 9.52mm, 11.5mm, 12mm, 12.7mm, 15mm, 15.8mm 20mm, 25mm
• Smooth, Smooth thick-walled, Grooved, Super grooved (deeper grooves)
• Connection to several circuits available
Name: Fin
• Material:
Aluminum, Copper Stainless steel, Titanium
Hot deep carbon steel, golded
•Coating:
E-coating> Al epoxy>hydrophilic
• Thickness:
0.1-2mm
• Type:
wave fin, flat fin , window fin
Name: Frame and casing
• Material:
Galvanized steel, Aluminum, Stainless steel
Copper, Brass
• Thickness:
1-5 mm
• End plates with or without collets
• Various design of side plates
How we design for you?
We promise we use the design software sold by a well-known European HAVC software company.
Through 8 years of cooperation with them, we have designed, processed and exported coils and unit coolers to various countries all around the world.
We will send you the 3D model drawing, data sheet together with the quotation list as you required.
Our Factory
VRCOOLERTECH CST Company
We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.
When it comes to building heat exchanger for any application VRCOOLERTECH CST Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, CST Company can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.
Our main products:
Commercial heat exchanger
Industrial heat exchanger
Dry cooler
Unit cooler
Charge air cooler
Compressor cooler(intercooler, aftercooler, oil cooler)
Our Equipments
Packing & Delivery
Water pressure test
Before package, we will do the pressure test in the pool to check if the product leak. (Process: Connect the inlet/outlet of the product to the tube s then put nitrogen in it, and put the product in water. If there is no bubbling, there is no leak.)
The normal package is wooden box. If export to european countries,the wooden box will be fumigated.
If container is too tigher,we will use PE film for packing or pack it according to customers special request.
We will delivery on time by sea or bt air according to your requiremnts.
Fan Coil Heat Exchangers
We have latest machinery and tools to produce condenser and evaporator coils for air conditioning and refrigeration applications.
We make coils for air cooled chillers, package units, split units, window units and fan coil units.
We make coils for air handling units (AHU) and coolant cooling coils.
We also make coils for refrigeration applications for such as freezers and condensing units, air blast coolers, we use seamless copper tube with sufficient wall thickness.
We can provide Aluminum fins or coated (Hydro Phobic or Hydro Folic) Aluminum fins or copper fins. We can vary fin spacing as shown in the specification table.
Clients feedback
All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.
High quality raw materials(Main parts)
Name: Tube
• Material:
stainless steel, copper, aluminum, Cu-Ni, brass, titanium
• Diameter:
5mm, 7 mm, 7.94mm, 9.52mm, 11.5mm, 12mm, 12.7mm, 15mm, 15.8mm 20mm, 25mm
• Smooth, Smooth thick-walled, Grooved, Super grooved (deeper grooves)
• Connection to several circuits available
Name: Fin
• Material:
Aluminum, Copper Stainless steel, Titanium
Hot deep carbon steel, golded
•Coating:
E-coating> Al epoxy>hydrophilic
• Thickness:
0.1-2mm
• Type:
wave fin, flat fin , window fin
Name: Frame and casing
• Material:
Galvanized steel, Aluminum, Stainless steel
Copper, Brass
• Thickness:
1-5 mm
• End plates with or without collets
• Various design of side plates
How we design for you?
We promise we use the design software sold by a well-known European HAVC software company.
Through 8 years of cooperation with them, we have designed, processed and exported coils and unit coolers to various countries all around the world.
We will send you the 3D model drawing, data sheet together with the quotation list as you required.
Our Factory
VRCOOLERTECH CST Company
We specialize in designing, manufacturing and exporting refrigeration equipments for the varied industries since 2004.
When it comes to building heat exchanger for any application VRCOOLERTECH CST Company has the capability to meet your requirements. If you need a heat exchanger using water, steam, refrigerant, glycol, ammonia, CO2 or any other medium, CST Company can build it for you. We build heat exchanger for replacement of existing heat exchanger or for new jobs, as well. We make standard copper tube / aluminum fin commercial heat exchanger and we build heavy industrial heat exchanger for process applications. You will be hard-pressed to come up with a job we can't handle.
Our main products:
Commercial heat exchanger
Industrial heat exchanger
Dry cooler
Unit cooler
Charge air cooler
Compressor cooler(intercooler, aftercooler, oil cooler)
Our Equipments
Packing & Delivery
Water pressure test
Before package, we will do the pressure test in the pool to check if the product leak. (Process: Connect the inlet/outlet of the product to the tube s then put nitrogen in it, and put the product in water. If there is no bubbling, there is no leak.)
The normal package is wooden box. If export to european countries,the wooden box will be fumigated.
If container is too tigher,we will use PE film for packing or pack it according to customers special request.
We will delivery on time by sea or bt air according to your requiremnts.
