 |
| Quantity: | |
|---|---|
Charge air cooler is an important component of a gas generator set diesel engine, which is used to reduce excessive air temperature before entering the engine to improve engine efficiency.
As the air heats up, its density is low, so the air pressure applied to the machine is lower when the air is cold.
Therefore, the charge air cooler improves the density of the air-tightness and the temperature-tightness.
A Charge Air Cooler (CAC) is an important component in gas generator sets (gensets) that utilize a turbocharger to increase the engine's air intake pressure. The CAC cools the compressed air before it enters the engine's combustion chamber, which increases the engine's power output and efficiency.
In a gas generator set, the CAC is typically located between the turbocharger and the engine's intake manifold. The compressed air passes through the CAC's heat exchanger, where it is cooled by a coolant (usually water or a mixture of water and antifreeze) that is circulated through the heat exchanger by a pump.
The CAC's effectiveness is dependent on several factors, including the ambient air temperature, the coolant temperature, and the engine's load and speed. In some cases, the CAC may become fouled with dirt, dust, or other debris, reducing its effectiveness and increasing the engine's operating temperature.
Benefits:
Longer service life for valve spindles, valve seat inserts, cylinder liners, pistons and piston rings.
Significantly reduced the risk of potential engine room fire
Reduced contamination of lubricating oil resulting in increased service life
Material Options:
Copper, Stainless steel, Carbon steel, Aluminum, CUNI, Titanium, etc.
Charge air cooler is an important component of a gas generator set diesel engine, which is used to reduce excessive air temperature before entering the engine to improve engine efficiency.
As the air heats up, its density is low, so the air pressure applied to the machine is lower when the air is cold.
Therefore, the charge air cooler improves the density of the air-tightness and the temperature-tightness.
A Charge Air Cooler (CAC) is an important component in gas generator sets (gensets) that utilize a turbocharger to increase the engine's air intake pressure. The CAC cools the compressed air before it enters the engine's combustion chamber, which increases the engine's power output and efficiency.
In a gas generator set, the CAC is typically located between the turbocharger and the engine's intake manifold. The compressed air passes through the CAC's heat exchanger, where it is cooled by a coolant (usually water or a mixture of water and antifreeze) that is circulated through the heat exchanger by a pump.
The CAC's effectiveness is dependent on several factors, including the ambient air temperature, the coolant temperature, and the engine's load and speed. In some cases, the CAC may become fouled with dirt, dust, or other debris, reducing its effectiveness and increasing the engine's operating temperature.
Benefits:
Longer service life for valve spindles, valve seat inserts, cylinder liners, pistons and piston rings.
Significantly reduced the risk of potential engine room fire
Reduced contamination of lubricating oil resulting in increased service life
Material Options:
Copper, Stainless steel, Carbon steel, Aluminum, CUNI, Titanium, etc.
