+86 0519 8878 2189
News Center
Home / News / What Are The Development Trends of Optical Module Heat Exchangers?

What Are The Development Trends of Optical Module Heat Exchangers?

Views: 0     Author: Site Editor     Publish Time: 2026-07-16      Origin: Site

Structure: From externally mounted cold plate to integrated direct cooling within the module (mainstream iterative direction)

First Generation (Existing Stock Retrofit): Top-mounted external cold plate (spring-loaded mounting), compatible with existing 800G switches, still dominating the retrofit market in the short term;

Second Generation (Currently in Mass Production): Cage-integrated cold plate, integrating the cage and cold plate, standard configuration for 1.6T switches;

Third Generation (Future Mainstream): Direct-insertion integrated heat exchanger, cold plate embedded inside the optical module housing, with built-in micro quick-connect connectors, eliminating the external bonding interface and interface thermal resistance, standard configuration for 3.2T/6.4T ultra-high power consumption, the unified standard solution promoted by OCP, Ciena, and Molex.

Heat exchange technology: Primarily single-phase water cooling, with breakthroughs in ultra-high heat flux density achieved through a dual-track approach of two-phase phase change and immersion in fluorinated liquid.

Low-to-medium power consumption (≤45W, 800G/1.6T): Single-phase microchannel cold plates remain the primary solution, with optimized micro-channels (manifold/biomimetic channels), reduced flow resistance, uniform liquid distribution, and optimized brazing process to prevent channel blockage.

Ultra-high power consumption (≥50W, 3.2T+):

Two-phase phase change cold plates: Refrigerant boiling phase change heat absorption, with heat exchange capacity more than twice that of single-phase, gradually entering small-batch commercial use.

Fully immersion coil heat exchangers: Fluorinated liquid immerses the entire rack's optical modules, with built-in micro-coils for heat exchange within the slots, enabling large-scale deployment in leading AI supercomputing rooms, with no interface heat conduction loss.

Optical Module Heat Exchangers.jpg

Material Upgrades: Lightweight + High Thermal Conductivity + Corrosion-Resistant Composite Materials Replace Traditional Aluminum and Copper

Base Material: 6063 Aluminum → Copper → Copper-Diamond Composite, Graphene Composite Base Material, 3D Printed Porous Alloy, increasing thermal conductivity by 40%~300% for the same volume;

Interface Thermal Conductivity: Conventional thermal pads → Wear-Resistant, Repeatably Insertable Solid-State TIM, Graphene Thermal Conductive Film, solving the problem of soaring thermal resistance after repeated insertions and removals (new materials配套 with Molex DDHS solution);

Pipeline Fittings: Miniature Stainless Steel Corrugated Pipes, Ultra-Thin Corrosion-Resistant Flexible Hoses, Miniaturized, Resistant to Ethylene Glycol/Fluoride Liquid Corrosion, Reducing the Space Occupied by Connectors.

Standardization + Miniaturization: Unified MSA dimensions, miniaturized and precision heat exchangers, modular and universal design.

Size Standardization: OSFP/QSFP-DD slot cold plate thickness locked at 3~6mm, unified water circuit quick-connect interface specifications (OCP, ODCC industry standards), interchangeable cold exchange components for switches and optical modules from different manufacturers;

Modularization: Independent miniature heat exchangers per slot, plug-and-play, single-slot replacement for faults, no need for whole-cabinet water outage maintenance, reducing IDC operation and maintenance costs;

CDU Side Plate Replacement: Miniaturized brazed plate heat exchangers, integrated with temperature control and flow sensing, single-unit multi-loop zone temperature control.

Intelligent system with low energy consumption, featuring full-chain digital management of liquid cooling. The heat exchanger incorporates a miniature temperature/flow sensor, with independent temperature control for each optical module. It dynamically adjusts the coolant flow rate based on real-time power consumption, reducing CDU water pump energy consumption and helping to lower the data center's PUE to below 1.1 (guided by national IDC energy efficiency policies).

Cooling and heating synergy design: Integrated simulation and synergy design of optical module cold plates and rack CDU board heat exchangers optimizes the entire rack's thermal system, moving beyond single-point component heat dissipation.

Low carbon footprint: High-efficiency heat exchangers reduce data center cooling energy consumption.

PHONE

International Business:+86 0519 8878 2189

Domestic business:+86 0519 8878 2190

QUICK LINKS

PRODUCTS

ABOUT US

When it comes to building heat exchanger for any application VRCOOLERTECH has the capability to meet your requirements.
Copyright © 2021 Changzhou Vrcoolertech Refrigeration Co.,Ltd All rights reserved.  Sitemap  Manage Entrance