+86 0519 8878 2189
News Center
Home / News / Variable Fin Spacing IQF Evaporator for Spiral Freezer | CST

Variable Fin Spacing IQF Evaporator for Spiral Freezer | CST

Views: 0     Author: Site Editor     Publish Time: 2026-11-05      Origin: Site

At CSTHEATEXCHANGER, we engineer and manufacture custom industrial Variable Fin Spacing (Progressive Fin Pitch) IQF Evaporators specifically tailored for Continuous Spiral Freezers (Single Drum, Double Drum, and Self-Stacking Spiral Systems) freezing poultry, seafood, red meat, bakery, prepared foods, and fruits/vegetables (refrigeration capacities engineered from 50 kW to over 1,200 kW per evaporator unit, air delivery rates from 20,000 m3/h to over 250,000 m3/h, operating at evaporating temperatures of −35∘C to −45∘C). Operating with progressive staged fin spacing across the coil depth (e.g., 16 mm / 20 mm on the warm air inlet, tapering to 12 mm in the intermediate rows, and 8 mm / 6 mm on the dry air discharge), our IQF spiral freezer evaporators prevent rapid frost choking at the coil face, extending continuous defrost-free production cycles from standard 6 hours to 16–24+ hours. Built with heavy-wall AISI 304/316L stainless steel tubes, marine-grade aluminum alloy fins (or 100% all-stainless construction), and high-efficiency direct-drive hygienic axial fans, CSTHEATEXCHANGER guarantees maximum frost-holding capacity, minimal product dehydration loss (<0.8%), and full washdown CIP compatibility.

variable fin spacing iqf evaporator for spiral freezer.jpg

1. Engineering Dynamics: Why Progressive Fin Pitch is Essential for Spiral IQF Freezers

In continuous spiral freezing, warm, high-moisture product (+15∘C to +65∘C) enters the insulated enclosure, continuously releasing humid air into the −38∘C freezing zone:

        PROGRESSIVE FIN PITCH IQF SPIRAL EVAPORATOR AIRFLOW DYNAMICS
        
   ======================= WARM HUMID RETURN AIR (INLET) =======================
   [ High Moisture from Continuous Steaming Food / Seafood / Poultry Products ]
                               │
                               ▼
   ┌────────────────────────────────────────────────────────────────────────────┐
   │ [ZONE 1: EXTRA-WIDE INLET FIN SPACING (16 mm - 25 mm / 1.0 - 1.5 FPI)]    │
   │ • Absorbs 70% of airborne moisture without choking the air face            │
   │ • Heavy frost deposits evenly along open fin channels without bridging    │
   └───────────────────────────┬────────────────────────────────────────────────┘
                               │ (Air temperature drops to -25°C)
                               ▼
   ┌────────────────────────────────────────────────────────────────────────────┐
   │ [ZONE 2: INTERMEDIATE FIN SPACING (10 mm - 14 mm / 1.8 - 2.5 FPI)]        │
   │ • Balances residual latent moisture extraction with sensible heat transfer │
   │ • Stable air velocity prevents snow entrainment into the product drum      │
   └───────────────────────────┬────────────────────────────────────────────────┘
                               │ (Air temperature drops to -38°C)
                               ▼
   ┌────────────────────────────────────────────────────────────────────────────┐
   │ [ZONE 3: TIGHT DISCHARGE FIN SPACING (6 mm - 8 mm / 3.2 - 4.2 FPI)]       │
   │ • High thermal density extracts sensible heat down to core setpoint        │
   │ • Air is completely dehumidified; frost formation rate is near zero        │
   └───────────────────────────┬────────────────────────────────────────────────┘
                               │
                               ▼
   ======================= ULTRA-COLD DISCHARGE AIR (-40°C) =====================
   [ Sweeps High-Velocity Air Across Spiral Drum -> Rapid Product Crust Freezing ]
================================================================================
CST VARIABLE FIN SPACING VS. CONVENTIONAL CONSTANT FIN SPACING EVAPORATORS
================================================================================
Design Parameter               Conventional Constant Fin Coil  CST Variable (Progressive) Fin Coil
--------------------------------------------------------------------------------
Fin Spacing Across Coil Depth  Constant (e.g., 10 mm / 12 mm)  Progressive: 20 mm -> 12 mm -> 6 mm
Inlet Face Choking Propensity  Severe (Frost bridges in 4–6 hrs)Zero Face Choking (Snow penetrates deeply)
Continuous Run Time per DefrostShort (6 to 8 Hours Maximum)   Extended (16 to 24+ Continuous Hours)
Daily Production Uptime        Loss of 2–3 Defrost Cycles/Day  1 Single Defrost per 24-Hour Day
Airflow & Static Pressure Drop Exponential Surge (Choked Fans) Flat, Predictable Pressure Gradient
Air Velocity on Spiral Drum    Decays Rapidly as Frost Grows   Consistently High (Rapid Crust Freezing)
Product Weight Dehydration     High (1.5% to 2.5% Loss)        Minimal (< 0.8% Moisture Loss)
CIP Cleaning & Water Drainage  Difficult in Packed Fin Cores   Fast, Complete Drainage & Sanitization
================================================================================

1. Extended Continuous Production Cycles

Standard evaporators with uniform fin spacing clog rapidly at the air entering face because warm air sheds the majority of its moisture immediately upon contacting the freezing coil. Once the face bridges with snow, airflow collapses, warm air bypasses the drum, and production must stop for hot-gas defrost. By utilizing 16 mm to 20 mm spacing on the inlet rows, CST coils allow snow to penetrate deep into the core without bridging, more than doubling continuous run time between defrosts.

2. Minimized Product Dehydration Loss (<0.8%)

Moisture loss (evaporation from warm food surfaces during chilling) directly erodes food processing profits. CSTHEATEXCHANGER designs IQF coils with large active heat transfer surface areas and low log-mean temperature differences (LMTD=4 to 5 K), maintaining high relative humidity inside the freezer enclosure to reduce product weight shrinkage from typical 2.0% down to under 0.8%.

2. Metallurgy & Hygienic CIP Construction

In food processing environments, hygiene, corrosion resistance, and chemical washdown survivability are non-negotiable:

        CST MODULAR IQF EVAPORATOR STRUCTURAL ELEVATION
        
   ======================= FULL AISI 304 STAINLESS CASING =======================
   [ Heavy-Duty Sloped Hygiene Frame with Reinforced Lifting Eyes & CIP Headers ]
                               │
                               ▼
   ┌────────────────────────────────────────────────────────────────────────────┐
   │ CORE SUBASSEMBLY INTEGRATION                                               │
   │ ┌────────────────────────┐ ┌────────────────────────┐ ┌──────────────────┐ │
   │ │ EXPANDED TUBE CORE     │ │ HEAVY DRAIN PAN        │ │ AXIAL FAN ARRAY  │ │
   │ │ SS304/SS316L or Copper │ │ Insulated bottom pan   │ │ IP66 Washdown    │ │
   │ │ Heavy AlMg3/SS fins    │ │ Full sloped drainage   │ │ Cast Al Impeller │ │
   │ └────────────────────────┘ └────────────────────────┘ └──────────────────┘ │
   └────────────────────────────────────────────────────────────────────────────┘
       CST FULL HYGIENIC CIP WASH DOWN & DEFROST INTEGRATION
       
   FROM CIP CHEMICAL DOZING SYSTEM / HOT GAS DEFROST MANIFOLD
   ┌─────────────────────────────────────────────────────────────────────────┐
   │ [ FULL CASING SLOPED HYGIENE DRAIN PAN (3 mm AISI 304/316L) ]           │
   ├───────────────────────────────────┬─────────────────────────────────────┤
   │ [ HOT GAS COIL DEFROST HEADERS ]  │ [ DUAL-CIRCUIT DRAIN PAN HEATERS ]  │
   │ • Heavy-wall stainless distributors│ • Insulated double-wall bottom pan │
   │ • Interlaced multi-circuit piping │ • Direct drain with anti-splash lips│
   └───────────────────────────────────┴─────────────────────────────────────┘
   100% SANITARY FOOD-GRADE DESIGN MEETS USDA / 3-A / EHEDG STANDARDS

1. Robust Tube & Fin Metallurgical Matrix

  • Ammonia (NH3 / R717): Seamless AISI 304 or AISI 316L heavy-wall stainless steel tubes mechanically expanded into heavy-gauge marine-grade AlMg3 aluminum fins or 100% AISI 304 stainless steel fins.

  • Carbon Dioxide (CO2 / R744): High-pressure stainless steel or specialized CuNi tubes rated for 60 to 90 bar60 to 90 bar working pressure.

  • Freon Halocarbons (R404A / R507 / R448A): Deoxidized seamless copper tubes or stainless tubes with heavy-gauge aluminum or epoxy-coated fins.

2. Fully Drainable Hygienic Casing & Insulated Pan

Our evaporator casings are fabricated from continuous TIG-welded 2.5 mm to 3.0 mm2.5 mm to 3.0 mm AISI 304 stainless steel. The bottom drain pan features an insulated double-wall construction with a continuous 3∘3∘ slope and oversized drain fittings, preventing standing water pools, ice damming, and bacterial harborage.

3. Product Configurations: Spiral Freezer Evaporator Layouts

        CSTHEATEXCHANGER SPIRAL FREEZER EVAPORATOR LAYOUTS
        
   [1. SIDE-MOUNTED HIGH-STATIC EVAPORATOR ARRAYS]
   • Positioned along the side wall of the insulated enclosure with horizontal airflow across the drum.
   • Ideal for high-capacity single drum and double drum spiral freezers in poultry and bakery lines.
   ─────────────────────────────────────────────────────────────────────────────
   [2. TOP-MOUNTED VERTICAL AIRFLOW COILS]
   • Mounted above the spiral drum delivering vertical downward high-velocity air curtain circulation.
   • Compact footprint tailored for low-headroom installations and self-stacking spiral towers.
   ─────────────────────────────────────────────────────────────────────────────
   [3. MULTI-STAGE STEPPED IQF CRUSTING & CORE FREEZING COIL BANKS]
   • Dual coil arrangement: high-velocity crusting stage at the inlet, followed by deep core freezing.

4. Technical Specifications — Variable Fin Spacing IQF Evaporators

(Note: The following engineering parameters represent standard manufacturing design envelopes. Tube metallurgy, progressive fin pitch stages, fan static pressures, and casing dimensions are customized to specific spiral freezer OEM dimensions.)

================================================================================
CSTHEATEXCHANGER VARIABLE FIN SPACING IQF EVAPORATOR (CST-IQF-S SERIES)
================================================================================
Engineering Parameter           Standard Manufacturing & Design Range
--------------------------------------------------------------------------------
Refrigeration Capacity Range    50 kW to 1,200+ kW per evaporator unit (Scalable)
Air Circulation Flow Rates      20,000 m³/h to 250,000+ m³/h (11,700 to 147,000+ CFM)
Operating Evaporating Temp.     -35°C to -45°C (-31°F to -49°F) Deep Freezing
Compatible Refrigerants         NH3 (R717 Overfeed / Pump Circulated), CO2 (R744), R404A, R507
Progressive Fin Pitch Stages    Inlet: 16–25 mm -> Middle: 10–14 mm -> Discharge: 6–8 mm
Tube Metallurgy Options         AISI 304, AISI 316L, High-Pressure SS (CO2), Deoxidized Copper
Tube Diameter & Wall Thickness  5/8" (15.88 mm) or 3/4" (19.05 mm) OD; Wall: 0.8 mm to 1.5 mm
Fin Material Options            Marine-Grade AlMg3 Aluminum, Pure Aluminum, AISI 304 Stainless Steel
Fin Thickness Range             0.30 mm to 0.50 mm (Heavy gauge for high-pressure CIP washdown)
Tube-Fin Expansion Integrity    Full Mechanical Ball Expansion (100% Metal-to-Metal Thermal Contact)
Casing & Frame Construction     Continuous TIG-Welded AISI 304 or AISI 316L Stainless Steel
Drain Pan Configuration         Double-Wall Insulated, 3° Sloped Bottom, Dual Hot-Gas / Electric Heat
Axial Fan Array Specifications  IP66 High-Static Direct-Drive Axial Fans, Cast Aluminum / SS Impellers
Defrosting Methods              Hot Gas Coil + Pan, Hot Water Defrost, Electric Heating Elements
Operating Pressure Rating       NH3: 25 bar (362 psi) | CO2: Up to 90 bar (1,305 psi)
Pressure Vessel Compliance      ASME Section VIII Div. 1, CE / PED 2014/68/EU, 3-A Sanitary / USDA
Testing & Quality Assurance     Helium Mass Spectrometer Leak Testing (Zero PPM Leak Standard)
================================================================================

5. Frequently Asked Questions (FAQ)

What is the primary benefit of variable fin spacing over uniform fin spacing in a spiral freezer?

In a spiral freezer, over 70% of the product's airborne moisture drops out within the first few tube rows of the evaporator. Uniform fin spacing (such as constant 10 mm) causes rapid ice buildup and bridging at the air entering face within 4 to 6 hours. Variable fin spacing provides wide 16–20 mm spacing at the inlet, allowing frost to deposit evenly across the coil depth without choking airflow, extending continuous production runs to 16–24+ hours.

How does coil design prevent product dehydration during continuous IQF freezing?

Product dehydration occurs when there is a large temperature difference (ΔTΔT) between the circulating cold air and the evaporator surface, which drives moisture out of warm food items. CSTHEATEXCHANGER designs IQF coils with extra-large heat transfer surface areas and a tight log-mean temperature difference (LMTD≤4–5 K), keeping relative humidity inside the freezer enclosure high and reducing moisture shrinkage to less than 0.8%.

Can CSTHEATEXCHANGER build drop-in replacement coils for existing spiral freezer brands?

Yes. We regularly engineer and manufacture 100% drop-in replacement evaporator coils for all major industrial spiral freezer manufacturers. Our engineering team matches exact enclosure mounting dimensions, fan cone positions, refrigerant feed/suction header locations, and coil airflow static pressures for seamless field retrofits.

Source Spiral Freezer IQF Evaporators from CSTHEATEXCHANGER

Maximize continuous spiral freezing uptime, reduce product weight loss, and ensure complete food hygiene compliance with CSTHEATEXCHANGER:

  • Custom Variable Fin Spacing IQF Evaporators (50 kW to 1,200 kW+)

  • Heavy AISI 304/316L Stainless Steel Tubes with Marine AlMg3 or All-Stainless Steel Fins

  • Ammonia (NH3 / R717), Carbon Dioxide (CO2 / R744), and Glycol/Freon Coils

  • Deep 16–24+ Hour Continuous Run Times with Zero Face Choking

  • Sanitary TIG-Welded Stainless Steel Casings with Double-Wall Insulated Sloped Drain Pans

  • Full ASME / CE / PED Compliance, Direct-Drive IP66 Axial Fan Assemblies & Global OEM Supply

Contact our food processing refrigeration engineering department today with your product type, freezing capacity (kg/h), enclosure dimensions, refrigerant type, and evaporating temperature for custom CAD proposals and factory-direct quotations.

PHONE

International Business:+86 0519 8878 2189

Domestic business:+86 0519 8878 2190

QUICK LINKS

PRODUCTS

ABOUT US

When it comes to building heat exchanger for any application VRCOOLERTECH has the capability to meet your requirements.
Copyright © 2021 Changzhou Vrcoolertech Refrigeration Co.,Ltd All rights reserved.  Sitemap  Manage Entrance