Views: 0 Author: Site Editor Publish Time: 2026-11-05 Origin: Site
At CSTHEATEXCHANGER, we design and manufacture industrial Stainless Steel Tube Aluminum Fin Ammonia (NH3 / R717) IQF Evaporator Coils engineered specifically for continuous spiral freezers, fluidized bed IQF tunnels, blast freezing chambers, and carton freezers (refrigeration capacities engineered from 40 kW to over 1,500 kW1 per coil block, air circulation flow rates from 15,000 m3/h to over 300,000 m3/h, operating at evaporating temperatures of −35∘C to −50∘C). Combining seamless heavy-wall AISI 304 or AISI 316L stainless steel pressure tubes (impermeable to corrosive anhydrous ammonia stress-cracking) with high-efficiency marine-grade AlMg3 aluminum alloy corrugated fins (full hydraulic/mechanical expansion ensuring 100% metal-to-metal thermal contact), our ammonia IQF coils deliver the ideal balance of extreme chemical longevity, lightweight structural efficiency, and high thermal conductivity. Featuring progressive variable fin spacing (16 mm / 20 mm inlet to 8 mm / 6 mm discharge) and full stainless steel washdown casings, CST coils eliminate ammonia leak hazards while extending continuous defrost-free production cycles to 16–24+ hours.
In industrial ammonia (NH3 / R717NH3 / R717) refrigeration, the tube-and-fin material matrix determines both operational safety and heat transfer efficiency:
STAINLESS STEEL TUBE & ALUMINUM FIN MECHANICAL EXPANSION MATRIX
======================= REFRIGERANT SIDE (INTERNAL TUBE) =======================
[ Anhydrous Ammonia (NH3 / R717) Liquid Overfeed Pump Circulation (-40°C) ]
│
▼
┌────────────────────────────────────────────────────────────────────────────┐
│ [SEAMLESS AISI 304 / 316L HEAVY-WALL STAINLESS STEEL TUBES (5/8" OR 3/4")] │
│ • 100% immune to ammonia stress-corrosion cracking & hydrogen embrittlement│
│ • Operating pressure 25 bar (Design test pressure up to 40 bar / 580 psi) │
│ • Orbitally TIG-welded returns with radiographic / helium leak inspection │
└───────────────────────────┬────────────────────────────────────────────────┘
│ (Full Hydraulic / Mechanical Ball Expansion)
▼
┌────────────────────────────────────────────────────────────────────────────┐
│ [HIGH-CONDUCTIVITY CORRUGATED AlMg3 ALUMINUM ALLOY FINS (0.35 - 0.50 mm)] │
│ • High thermal conductivity (205 W/m·K) provides rapid heat extraction │
│ • 60% lighter weight than all-stainless coils (reduces structural loads) │
│ • Heavy fin gauge withstands repeated high-pressure chemical CIP washdowns │
└───────────────────────────┬────────────────────────────────────────────────┘
│
▼
======================= AIR SIDE (EXTERNAL ENCLOSURE) =======================
[ High-Velocity Sub-Zero Air (-38°C) Sweeps Across Spiral/Tunnel Products ] ================================================================================
CST SS TUBE/AL FIN VS. ALL-STAINLESS STEEL VS. GALVANIZED STEEL AMMONIA COILS
================================================================================
Evaluation Metric CST SS Tube / Al Fin Coil All-Stainless Steel Coil Hot-Dip Galvanized Steel Coil
--------------------------------------------------------------------------------
Internal Ammonia Resistance 100% Immune (AISI 304/316L) 100% Immune (AISI 304/316L) Moderate (Prone to scale)
Fin Thermal Conductivity High (AlMg3: ~205 W/m·K) Low (SS: ~16 W/m·K) Moderate (Zinc/Steel: ~50 W/m·K)
Required Heat Transfer Area Optimized & Compact Core Requires 25–35% Larger Area Bulky, Heavy Footprint
Total Coil Weight Lightweight (~1.0x Base Weight) Heavy (~2.4x Heavier) Extremely Heavy (~3.2x Heavier)
Defrost Energy Consumption Low (Fast thermal response) High (Large metal mass to heat) High (Sluggish hot gas defrost)
CIP Washdown Durability Heavy-Gauge AlMg3 Resists CIP 100% Acid/Caustic Resistant Zinc coating strips in acid wash
Total Initial Capital Cost Cost-Effective High Performance Premium High Cost Low Initial / High Maintenance
================================================================================ While ammonia rapidly attacks copper alloys, it has zero corrosive effect on stainless steel. However, all-stainless steel coils suffer from low fin thermal conductivity (16 W/m⋅K16 W/m⋅K), requiring massive, heavy coil blocks. CSTHEATEXCHANGER's hybrid SS tube / Aluminum fin design pairs the structural safety of stainless steel with high-conductivity AlMg3 aluminum fins, delivering compact, high-efficiency IQF cooling.
To prevent thermal resistance degradation across thousands of thermal contraction cycles (ambient +25∘C CIP washdown down to −45∘C evaporating temperatures), our stainless tubes undergo precision mechanical ball expansion. This creates a tight, permanent metal-to-metal interference fit, ensuring zero fin loosening or thermal efficiency decay over decades of service.
CST MODULAR AMMONIA IQF EVAPORATOR STRUCTURAL ELEVATION
======================= FULL AISI 304 STAINLESS CASING =======================
[ Sloped Hygiene Casing with Hot-Gas Defrost Distribution Manifolds & Fans ]
│
▼
┌────────────────────────────────────────────────────────────────────────────┐
│ CORE SUBASSEMBLY INTEGRATION │
│ ┌────────────────────────┐ ┌────────────────────────┐ ┌──────────────────┐ │
│ │ SS TUBE / AL FIN CORE │ │ INSULATED DRAIN PAN │ │ REFRIGERANT HDR │ │
│ │ Progressive Fin Pitch │ │ 3° Continuous slope │ │ Stainless steel │ │
│ │ 20 mm -> 12 mm -> 6 mm │ │ Hot-gas defrost coils │ │ Overfeed pump cir│ │
│ └────────────────────────┘ └────────────────────────┘ └──────────────────┘ │
└────────────────────────────────────────────────────────────────────────────┘ CST PROGRESSIVE VARIABLE FIN SPACING AMMONIA COIL MATRIX
WARM HUMID RETURN AIR FROM FOOD INLET (+20°C TO +60°C AIR STREAM)
┌─────────────────────────────────────────────────────────────────────────┐
│ [ ROW 1 - 4: 20 mm FIN PITCH ] -> Deep snow penetration; zero choking │
├─────────────────────────────────────────────────────────────────────────┤
│ [ ROW 5 - 12: 12 mm FIN PITCH ] -> Latent moisture extraction & cooling │
├─────────────────────────────────────────────────────────────────────────┤
│ [ ROW 13 - 24+: 6 mm FIN PITCH ] -> Maximum sensible heat transfer core │
└─────────────────────────────────────────────────────────────────────────┘
DISCHARGE: ULTRA-COLD -40°C DEHUMIDIFIED AIR TO SPIRAL FREEZING DRUM Equipped with progressive fin spacing (20 mm→12 mm→6 mm), CST ammonia coils allow snow and frost from steaming IQF products (hot shrimp, cooked poultry, steaming dumplings) to deposit deep inside the coil core without bridging the entering face, extending continuous defrost-free run times to over 16 to 24 hours.
Optimized for 3:1 to 4:13:1 to 4:1 liquid overfeed (bottom-feed / top-suction) pumped ammonia circulation systems, our stainless steel headers and multi-circuit distributors provide uniform liquid refrigerant distribution across all tube circuits, eliminating dry spots and maximizing inner-tube heat transfer coefficients.
CSTHEATEXCHANGER AMMONIA IQF EVAPORATOR CONFIGURATIONS
[1. SPIRAL FREEZER SIDE-MOUNTED EVAPORATOR BANKS]
• Horizontal high-static airflow arrays designed for single and double drum spiral freezers.
• Heavy-gauge AISI 304 stainless steel casing with integrated sloped defrost drain pans.
─────────────────────────────────────────────────────────────────────────────
[2. FLUIDIZED BED IQF TUNNEL AIR COOLERS]
• High-static vertical upward airflow design creating high-velocity aeration for berries and peas.
• Heavy $0.45\text{ mm}$ AlMg3 fins withstand extreme pulsating airflow and thermal cycling.
─────────────────────────────────────────────────────────────────────────────
[3. BLAST FREEZING ROOM HEAVY-DUTY UNIT COOLERS]
• Long-throw high-velocity ceiling or floor-mounted unit coolers for meat carton blast freezing. (Note: The following engineering parameters represent standard manufacturing design envelopes. Tube circuits, fin pitch staging, casing dimensions, and header configurations are customized to exact plant refrigeration drawings.)
================================================================================
CSTHEATEXCHANGER AMMONIA IQF EVAPORATOR COIL (CST-NH3-SSA SERIES)
================================================================================
Engineering Parameter Standard Manufacturing & Design Range
--------------------------------------------------------------------------------
Refrigeration Capacity Range 40 kW to 1,500+ kW per coil block (Scalable)
Air Circulation Flow Rates 15,000 m³/h to 300,000+ m³/h (8,800 to 176,000+ CFM)
Operating Evaporating Temp. -35°C to -50°C (-31°F to -58°F) Deep IQF Freezing
Refrigerant Feed Mechanism Pump-Circulated Liquid Overfeed (3:1 to 4:1 Ratio) / DX
Compatible Refrigerants Anhydrous Ammonia (NH3 / R717), CO2 (R744), Glycols
Tube Metallurgy Options Seamless AISI 304, AISI 304L, AISI 316L Stainless Steel
Tube Outside Diameter (OD) 5/8" (15.88 mm) or 3/4" (19.05 mm) Heavy Wall (0.8–1.5 mm)
Fin Material Options Marine-Grade AlMg3 Aluminum, Pure Aluminum 1050 / 8011
Fin Thickness Range 0.35 mm to 0.50 mm (Heavy gauge for high-pressure washdown)
Progressive Fin Pitch Staging Inlet: 16–25 mm -> Intermediate: 10–14 mm -> Discharge: 6–8 mm
Tube-Fin Expansion Method Precision Mechanical Ball Expansion (100% Interference Fit)
Casing & Frame Construction Continuous TIG-Welded AISI 304 or AISI 316L Stainless Steel
Drain Pan Configuration Double-Wall Insulated Stainless Steel Pan with 3° Slope
Defrosting Methods Hot Gas Coil + Pan Defrost, Water Spray, Electric Elements
Design Operating Pressure 25 bar (362 psi) | Factory Hydrostatic Test: 40 bar (580 psi)
Leak Detection Quality Gate 100% Helium Mass Spectrometer Vacuum Testing (Zero PPM Leak)
Pressure Vessel Compliance ASME Section VIII Div. 1, CE / PED 2014/68/EU, ISO 9001:2015
================================================================================ All-stainless steel coils have very low fin thermal conductivity (16 W/m⋅K16 W/m⋅K compared to aluminum's 205 W/m⋅K), making them over 2.4× heavier and requiring much larger coil footprints. The CST stainless steel tube / aluminum fin hybrid provides 100% immunity to internal ammonia corrosion while maximizing heat transfer efficiency and reducing structural weight.
Warm, humid air entering the freezer sheds over 70% of its moisture within the first few tube rows. By providing extra-wide 16–20 mm fin spacing at the inlet, frost deposits deeply along the fin channels without blocking the air face. The fin spacing then tightens to 6–8 mm6–8 mm on the discharge where air is cold and dry, extending continuous run time to 16–24+ hours between defrosts.
Yes. We specialize in engineering 100% dimensional drop-in replacement ammonia evaporator coils for all major OEM spiral and tunnel freezers. We match exact casing dimensions, fan orifice positions, liquid supply/suction header orientations, and coil static pressure drops for zero-modification field retrofits.
Ensure 100%100% ammonia safety, maximize continuous freezing run times, and optimize thermal performance with CSTHEATEXCHANGER:
Custom SS Tube / Al Fin Ammonia IQF Evaporator Coils (40 kW to 1,500 kW+)
Seamless AISI 304/316L Stainless Tubes Expanded into Heavy AlMg3 Aluminum Fins
Progressive Variable Fin Pitch (20 mm→12 mm→6 mm) for 24h Uptime
Full Sanitary TIG-Welded AISI 304 Stainless Steel Casings & Insulated Sloped Drain Pans
Pumped Liquid Overfeed & DX Headers with ASME / CE PED Pressure Vessel Certification
100%100% Factory Helium Mass Spectrometer Leak Tested & Global Direct OEM Delivery
Contact our specialized industrial refrigeration engineering team today with your required cooling capacity (kW), evaporating temperature, freezer dimensions, and defrost specifications for custom CAD proposals and factory-direct quotations.
Website: https://www.cstheatexchanger.com/
Technical Inquiries: info@cstheatexchanger.com
International Business:+86 0519 8878 2189
Domestic business:+86 0519 8878 2190