Views: 0 Author: Site Editor Publish Time: 2026-07-06 Origin: Site
SS316 tube-fin heat exchanger is a drop-in replacement coil for standard copper tube + aluminum fin AHU evaporator / chilled water cooling coil / heating coil.
Traditional copper coils fail fast in corrosive, high-humidity, chemical, coastal, pharmaceutical & food factory environments due to pinhole corrosion, oxidation and refrigerant leakage. SS316 stainless steel coils solve this pain point while keeping identical mounting dimensions for direct retrofit on existing air handling units.
2. Material Configuration Comparison
Component |
SS316 Replacement Coil |
Conventional Copper Coil |
|---|---|---|
Heat transfer tube |
Seamless SUS316 stainless steel tube OD9.52/12.7mm, thick wall anti-corrosion |
TP2 copper seamless tube |
Fins |
SUS316 stainless steel fins / epoxy coated aluminum fins |
Bare aluminum fin, prone to oxidation & salt corrosion |
Header & water manifold |
Integral SUS316 manifold, full argon shield welding |
Copper or carbon steel header |
Frame & bracket |
SUS304 / SUS316 anti-rust frame |
Galvanized steel frame easy to rust in corrosive air |
Wetted fittings |
SS316 air vent, drain valve |
Copper or plastic accessories |
3. Core Advantages of SS316 Coil Over Copper Coil
3.1 Outstanding Corrosion Resistance (Most Critical Merit)
SS316 contains molybdenum element, resisting:
Coastal salt fog & chloride ion erosion
Disinfectant vapor, weak acid/alkaline mist in pharma & food workshops
Swimming pool chlorine gas, industrial waste gas
Humid underground air & chemical workshop exhaust
Effectively avoid copper tube pinhole leakage, extend service life 3–6 times vs copper coils.
3.2 Cleanroom & Food-Grade Compliance
No copper oxide powder shedding; smooth stainless steel surface reduces dust & microbial adhesion. Meets GMP, aseptic workshop, food processing production standards, avoids particle contamination to production lines.
3.3 High Mechanical Strength & Anti-Vibration
Higher rigidity than copper, resistant to deformation during transport, installation, high-pressure air washing maintenance. Stable operation under long-term AHU fan vibration.
3.4 Direct Drop-In Retrofit Compatibility
Customized to match original copper coil’s overall size, tube rows, water/refrigerant port position, air flow direction. No modification to AHU cabinet, ductwork, fan or piping during replacement, short downtime for factory renovation projects.
3.5 Wide Fluid Compatibility
Fit for multiple working media:
DX refrigerant circuit (ammonia, R410A, R134a, R454B)
Chilled water dry coil (cleanroom sensible cooling)
Hot water heating coil
Glycol anti-freeze fluid loop
4. Performance Characteristics
Thermal conductivity of SS316 is lower than copper. Design compensations: optimized fin spacing, increased fin area, more tube rows to match original cooling/heating capacity of copper coil.
Air-side performance: identical face velocity & air pressure drop as original copper coil, no need to replace AHU fan motor.
Two functional types available for AHU:
DX SS316 evaporator coil: Cooling & dehumidification for standard air conditioning AHU
Chilled water SS316 dry coil: Sensible cooling only, dew-point controlled for cleanroom MAU
5. Typical Application Scenarios for AHU Retrofit
Coastal industrial & commercial air handling units
Pharmaceutical, biotech, medical device GMP cleanroom MAU
Food processing, slaughterhouse, beverage factory ventilation AHU
Indoor swimming pool, aquatic venue air conditioning units
Chemical plant, laboratory exhaust & fresh air AHU
Underground tunnel, parking ventilation air handlers
International Business:+86 0519 8878 2189
Domestic business:+86 0519 8878 2190