Views: 1 Author: Site Editor Publish Time: 2022-07-11 Origin: Site
Power plants use many condensers to condense the steam for the turbine discharges.
After passing through the steam turbine, the steam becomes steam-exhausted and the pressure and temperature become lower. Had to pass this part of the condenser to dissipate heat. Turn steam into supercooled water. Then pump the water pressure hit high, into the boiler heating. If the lack of steam directly pressurized pump, due to lack of steam is the gas, the pump size will be large, unrealistic. Therefore, it is necessary to dissipate the heat of steam into water, liquid water volume, easy to pressurize, pump volume is moderate.
Waste Heat Recovery Heat Exchanger for Waste Heat from Exhaust Vapour and Wastewater
High and Low Temperature (HT<) Dry Coolers for Engine Cooling at a Distance
High and Low Temperature Dry Coolers Provide Remote Heat Dissipation for Engines
1CV -10 1st Stage 2nd Stage After Cooler Serial Number 100716 7X14895
Nickel-copper Tube Fin Heat Exchanger for Haitian Soy Sauce Plant
International Business:+86 0519 8878 2189
Domestic business:+86 0519 8878 2190