News - Changzhou Vrcoolertech Refrigeration Co.,Ltd

News Center

Home / News

News and Events

Plate Air Preheater for Cooling Oil Heat-Treatment Smoke at a Bolt Factory

A properly designed gas-to-gas plate air preheater can transfer heat from hot smoke or exhaust gas generated during oil-based heat treatment to a separate incoming-air stream. This lowers the temperature of the treated exhaust gas while preheating combustion air, make-up air, or another clean proces

2026-09

CSTHEATEXCHANGER Heat Exchanger for Rear-Door Rack Cooling

A rear-door rack application normally uses a liquid-to-air rear-door heat exchanger (RDHx). The exchanger replaces or attaches to the rear door of a server rack. Hot exhaust air from the servers passes through a fin-and-tube coil, while chilled water or a water-glycol fluid circulates inside the tub

2026-09

CSTHEATEXCHANGER Dry Cooling Coils (DCC) for HVAC Projects

A dry cooling coil (DCC) is a water or fluid coil designed to remove sensible heat from air while operating above the entering-air dew-point condition. When correctly selected and controlled, the coil cools air without intentionally producing condensate on the fin surface. This makes a DCC suitable

2026-09

CSTHEATEXCHANGER Heat Exchanger for Cooling Textile Wastewater From 55°C To 35°C

At CSTHEATEXCHANGER, we develop industrial heat exchanger and cooling-coil solutions around the actual process conditions. We do not select equipment from temperature alone. For textile wastewater, we first establish the heat duty, then address fouling, corrosion, cleanability, materials, and contro

2026-09

50 m² Shell-and-Tube Heat Exchanger for a Vacuum Fryer

We have developed a 50 m² shell-and-tube heat exchanger for use in a vacuum frying system. The unit is designed to transfer heat between palm oil at 110°C and mineral oil at 130°C, supporting indirect heating for the vacuum fryer process.Designed for Indirect Heating in Vacuum Frying EquipmentIn a v

2026-09

Cooling Coil and Condenser for Pastry Chillers: A Practical Selection Guide from CSTHEATEXCHANGER

When a pastry chiller must protect product quality, appearance, and service continuity, the cooling coil and condenser cannot be selected as isolated parts. The evaporator-side cooling coil removes heat from the cabinet or room, while the condenser rejects that heat to the surrounding air or another

Total 863 pages Go to Page
Go

News and Events

PHONE

EMAIL

QUICK LINKS

PRODUCTS

ABOUT US