 |
| Quantity: | |
|---|---|
Microchannel evaporator coils are increasingly becoming a necessary technology, and many industries are beginning to choose to use microchannels instead of traditional coils on both the condenser and evaporator sides.
An air conditioner unit with an evaporative coil utilizes no more than 20% of the coil area, if the evaporative coil is replaced with a microchannel evaporator coil, the advantage is huge as it can utilize microchannels only for the surfaces that are needed , saving a lot of money.
Microchannel evaporator coil advantage:
Up to 50%less refrigerant charge;
More than 30% higher HT efficiency;
Up to 30%lower air side DP;
Lighter in weight, less volume: up to 50%;
100% 3102 Aluminum, easy to recycle;
Special design for good refrigerant distribution;
Special fin design for good water drainage.
The coating of the microchannels also increases resistance to chemical influences and prevents corrosion.
Optional anti-corrosion process: painting, spraying, electrophoresis, nano-coating.
Microchannel evaporation coils can be used in the following industries:
Heat Pump Unit
Industrial drying equipment
Hotel dryer
Air-cooled dehumidifier (for basement, exhibition hall, high-speed, underground warehouse and more)
Industrial Air Cooled Chiller
rooftop air conditioning unit machine
Air energy water heater Etc.
Hydrophilic coating, defrosting process:
Microchannel evaporator coils are increasingly becoming a necessary technology, and many industries are beginning to choose to use microchannels instead of traditional coils on both the condenser and evaporator sides.
An air conditioner unit with an evaporative coil utilizes no more than 20% of the coil area, if the evaporative coil is replaced with a microchannel evaporator coil, the advantage is huge as it can utilize microchannels only for the surfaces that are needed , saving a lot of money.
Microchannel evaporator coil advantage:
Up to 50%less refrigerant charge;
More than 30% higher HT efficiency;
Up to 30%lower air side DP;
Lighter in weight, less volume: up to 50%;
100% 3102 Aluminum, easy to recycle;
Special design for good refrigerant distribution;
Special fin design for good water drainage.
The coating of the microchannels also increases resistance to chemical influences and prevents corrosion.
Optional anti-corrosion process: painting, spraying, electrophoresis, nano-coating.
Microchannel evaporation coils can be used in the following industries:
Heat Pump Unit
Industrial drying equipment
Hotel dryer
Air-cooled dehumidifier (for basement, exhibition hall, high-speed, underground warehouse and more)
Industrial Air Cooled Chiller
rooftop air conditioning unit machine
Air energy water heater Etc.
Hydrophilic coating, defrosting process:
